# Changelog # ## [Unreleased] ## ### Fixed ### - [#117] Closing TCP connection in think state considered an error? - [#121] Unable to send a line feed in websoscket request - [#126] Timeouts for *get_next_session* not reported correctly - [#136] MAX_PROC not actually changeable - [#161] Websocket match randomly fail - [#162] ** not working along with **? - [#204] Timeout won't apply unless something happen to socket - [#218] Certificates are not getting set/sent correctly - [PR #148] clear accumulated data when websocket closed - [PR #183] fix formula for load average - [PR #202] fixing oauth 1.0 authorization header creation, signature with body, alphanumerical nonce - [PR #228] Where IQ PING was enabled from XMPP server. Tsung cannot reply ### Changed ### - [#136] Speedup Tsung starting when using hundreds of clients - [#145] Update or remove eldap in favor of OTP's eldap - [#150] Distributed Erlang Port Range Hard-Coded - [#159] Use new time API when building Tsung with otp R18 - [PR #124] Rename configure.in to configure.ac - [PR #125] Work around compiler warning and provide backward compatibility - [PR #198] Record extra headers in the HTTP proxy recorder - minimum erlang version is R16B ### Added ### - [#132] WSS connections - [#182] add option to set websocket subprotocols - [#189] Add direct-ip support for tsung nodes interconnection - [#201] add option to start a phase after all generated users in the previous phase have finished their session - [#225] stop entire test execution in do - [#242] tsung to support Linux client to using a range of secondary IP addresses - [PR #151] Add option to specify SSL protocol - [PR #153] Add latency measurement to XMPP MUC and PubSub - [PR #233] BOSH support for chunked transfer encoding. - [PR #235] Provide regex to use with varnish log - [PR #240] Added Jabber support for SASL EXTERNAL - add option to start tsung with only the web view (to view old runs stats) ## [1.6.0] - 2015-07-20 - Major enhancements and bugfixes ## ### Fixed ### - [TSUN-225] - SSL Session Caching Issues - [TSUN-292] - Indecipherable error with no arrivalphase elements - [TSUN-294] - Logging(?) of unmatched dyn vars puts lot of pressure on controller - [TSUN-295] - tsung status crashes test run - [TSUN-296] - Reported response size in dumpfile seems to be way too low - [TSUN-297] - Float values in thinktimes substitution - [TSUN-305] - Can't connect with +TLS to ejabberd/XMPP - [TSUN-308] - Handle *ssl_closed* in *ts_client* - [TSUN-309] - RNG Seeding is too weak and causes collisions - [TSUN-312] - Handle cast new beam failed - [TSUN-316] - LDAP scenarios fail when compiled with R16A/B due to *asn1rt_ber_bin* - [TSUN-320] - `get_os_data(freemem, {unix, linux})` crashes on Linux 3.10.0 - [PR #91] - [MQTT] Last Will and Testament should not be included if will_topic is not set. - [PR #104] - Fix problem with MQTT SUBACK packages - [PR #107] - Fix crash when `use_controller_vm="false"` and controller id is not empty - [PR #109] - Fix race condition in `ts_utils:make_dir/1` ### Changed ### - [TSUN-307] - Allow all HTTP headers to be overridden by - [PR #111] - Add subst for amqp exchange, routingKey and queue name - [PR #79] - added support for mqtt user and password - [PR #81] - Allow setting of dynamic vars for MQTT's username and password - [PR #93] - Add two config option ### Added ### - [TSUN-290] - Add a web dashboard embedded in tsung controller - [TSUN-293] - Enable node local dumptraffic log - [TSUN-304] - Add command line option to add additional erlang module load paths - [TSUN-306] - Add connection_timeout option - [PR #106] - XMPP message latency measurement ## [1.5.1] - 2014-04-07 - Major enhancements and bugfixes ## ### Fixed ### - [TSUN-250] - BOSH Crash - [TSUN-252] - Too many requests when using max_restart - [TSUN-253] - Code blocks in html version of user manual is unreadable - [TSUN-256] - Unexpected ack="global" behaviour on BOSH - [TSUN-265] - Wrong header line in tsung.dump - [TSUN-270] - Substitution not working in path attribute - [TSUN-271] - SSL does not work with erlang >= R16 - [TSUN-272] - Support literal IPv6 addresses when defining servers - [TSUN-278] - Tsung 1.5.0 is notable to do https out of the box when it is compiled from tarballs - [TSUN-279] - Tsung 1.5.0 is not able to do substitution of hostname or port in a URL. It only can do substitution of path - [TSUN-281] - Fix debian build for Tsung 1.5, replaces DocBook with Sphinx - [TSUN-285] - In some rare conditions in a distributed setup, Tsung fails to start the load test. - [TSUN-287] - request.max statistic lower than request.mean - [PR #71] - oAuth bug fix, PUT method - [PR #41] - Fix websocket path subst - [PR #44] - Add bidi attribute to change_type - [PR #49] - Fix websocket close issue: we should wait a close response ### Changed ### - [TSUN-255] - Fix unused vars in tq_amqp - [TSUN-259] - Tsung in Fedora - [TSUN-268] - Use xmerl_sax_parser:file/2 in case of xml parsing error - [TSUN-276] - Add text frame support for websocket - [TSUN-284] - Do not use boot files to start tsung and tsung_controller applications - [PR #51] - Updated dygraph charting library to the latest release - [PR #65] - AMQP: add multiple channel, add waitForConfirms and waitForMessages - [PR #70] - Add bosh_path config option - [PR #74] - Add text frame support for Websocket, and update doc ### Added ### - [TSUN-260] - Add option to change popularities of sessions for each phase - [TSUN-264] - New comparison operators - [TSUN-269] - Logging of request tags to dumpfile - [TSUN-275] - Add MQTT support - [TSUN-280] - Tsung to support pkcs#12 certificates or at least cacerts, clientcerts and keys - [PR #42] - Adding *all_except_body* option to *ts_http request* subst. - Adding mysqladmin monitoring options to erlang monitors. - Adding mean rate calculation to tsung_stats reports. - Adding *--title option* to set header of report - [PR #75] - Support SSL/TLS client certificate file attributes for jabber starttls ## [1.5.0] - 2013-05-24 - Major enhancements and bugfixes ## ### Fixed ### - [TSUN-208] - in the jabber plugin, substitutions for raw request doesn't work in some cases. - [TSUN-209] - If tag doesn't work with Tsung 1.4.2 - [TSUN-212] - Incorrect ERTS version being set on build. - [TSUN-215] - normal ack timeout shouldn't used for global ack - [TSUN-217] - If statement breaks on empty string - [TSUN-218] - Race condition in tsung-recorder - [TSUN-219] - Site fails to load via proxy recorder - [TSUN-220] - Large configuration files trigger error - [TSUN-229] - compatibility with erlang R15B - [TSUN-230] - can't connect with TLS + ejabberd - [TSUN-232] - Tsung for bosh protocol doesn't send a empty request to keep the user session alive. - [TSUN-234] - Error encoding json string with escape_uri - [TSUN-238] - Content-Length parsing broken - [TSUN-241] - Invalid link Other in the graph.html - [TSUN-245] - Message when dtd is not found not trivial ### Changed ### - [TSUN-174] - add an option to set resource in XMPP - [TSUN-222] - Support unsubscribe operation for Jabber pubsub module - [TSUN-228] - allow substitutions on cookies - [TSUN-236] - Add probability support for servers - [TSUN-242] - add timestamp and request duration in dump=protocol for http - [TSUN-246] - http PATCH support ### Added ### - [TSUN-214] - Ability to pass attributes for node creation for XMPP pubsub protocol. - [TSUN-227] - add new dynamic variable to get server hostname and port - [TSUN-231] - add option to use weights instead of probabilities for sessions - [TSUN-239] - add BOSH support - [TSUN-240] - add websocket support - [TSUN-244] - Percentile computation - [TSUN-248] - add AMQP support ## [1.4.2] - 2012-01-04 - Minor enhancements and bugfixes ## ### Fixed ### - [TSUN-199] - computation of NUsers is wrong - [TSUN-206] - build failure with erlang R15B ### Changed ### - [TSUN-202] - IPv6 support - [TSUN-203] - snmp oids should be customizable in the config file - [TSUN-205] - handle dyn_variables as array in test conditions (if/until/while) ### Added ### - [TSUN-191] - allow outputting log to stdout - [TSUN-192] - structured log output (JSON) - [TSUN-193] - accept configuration from stdin - [TSUN-197] - Have bug and error message on stderr and not stdout. ## [1.4.1] - 2011-09-13 - Minor bugfixes ## ### Fixed ### - [TSUN-188] - munin plugin is not working in 1.4.0 - [TSUN-189] - the controller VM is not used in some case - [TSUN-190] - pgsql recorder can record a connect request in an already connected session ## [1.4.0] - 2011-09-05 - Major enhancements and bugfixes ## ### Fixed ### - [TSUN-129] - regexp (defined in match or dynvars) can fail when chunk encoding is used. - [TSUN-150] - Munin monitoring broken by cpu stats config request - [TSUN-163] - Tsung doesn't detect subdomains. - [TSUN-166] - snmp monitoring does not work with erlang R14A - [TSUN-171] - maxnumber set in a phase is not always enforced - [TSUN-172] - auth sasl can't authenticate against ejabberd - [TSUN-178] - some characters can make url and headers rewriting fail in the recorder - [TSUN-179] - tsung generated message stanzas are not XMPP compliant - [TSUN-180] - file server crash if a dynamic substitution use it - [TSUN-182] - When many clients are configured with few static users, none of them are launched. - [TSUN-183] - tsung can stop too soon in some cases - [TSUN-184] - *random_number* with start and end actually returns a number from start+1 to end - [TSUN-187] - Client IP scan is very slow on Linux; also uses obsolete `ifconfig` ### Changed ### - [TSUN-54] - tsung is very slow when a lot of dynamic variables are set - [TSUN-96] - generating more than 64k connections from a single machine - [TSUN-106] - Add content-encoding support for dynvar extraction - [TSUN-123] - add option to read usernames from an exteraln file for jabber - [TSUN-125] - use the new re module everywhere instead of regexp/gregexp - [TSUN-152] - Add *state_rcv* record as parameter to *get_message* function. - [TSUN-153] - dynvar used in match may contain regexp special characters - [TSUN-185] - handle postgresql extended protocol ### Added ### - [TSUN-162] - add foreach tag (loop when a dyn_variable is a list) - [TSUN-164] - add a switch to allow light queries/replies logging - [TSUN-165] - add a way to synchronize users for all plugins. - [TSUN-167] - add do=dump option to matching - [TSUN-168] - thinktimes value could be dynamically generated with dyn_variable - [TSUN-181] - add option to simulate slow connections ## [1.3.3] - 2010-08-17 - Minor bugfixes ## ### Fixed ### - [TSUN-154] - parent proxy doesn't work anymore in 1.3.x (tested with 1.3.2 and 1.3.0). - [TSUN-155] - url substitution is broken in some cases - [TSUN-156] - Tsung not using sessions with low probabilities - [TSUN-157] - ssl doesn't work with erlang R14A - [TSUN-158] - failure when a proxy is used and an URL substitution is set - [TSUN-159] - HTTP cookies support is broken when a proxy is used - [TSUN-160] - tsung can sometimes hang at the beginning using distributed setup - [TSUN-161] - if statement not allowed in a transaction ## [1.3.2] - 2010-06-14 - Major bugfixes and enhancements ## ### Fixed ### - [TSUN-128] - Apostrophes cause string to convert to deep list in setdynvars with Erlang function. - [TSUN-130] - static users starting time is wrong - [TSUN-131] - tsung can stop too early when static users are used - [TSUN-132] - http cookies: accept domains equals to hostname with a leading "." - [TSUN-133] - proxy-recorder with SSL fails on large client packets (multiple TCP packets) - [TSUN-138] - when an error occured( for ex a timeout during a request) and a client exits, started transactions are not updated - [TSUN-140] - tsung does not honor the Proxy-Connection: keep-Alive or Connection: keep-Alive header if the proxy is HTTP/1.0 - [TSUN-142] - http recorder can fail with https rewriting and chunked encoding - [TSUN-147] - UDP & bidi does not seem to work - [TSUN-148] - dynvar not found when used in match - [TSUN-149] - tsung doesn't work with Amazon Elastic load balancing - [TSUN-151] - tsung_stats.pl produces invalid `*.gplot` files ### Changed ### - [TSUN-82] - XMPP vhost support - [TSUN-127] - add ability tu use floats for thinktimes - [TSUN-139] - option to set random seed for launchers. - [TSUN-141] - add dynamic variable support for postgres - [TSUN-146] - New tsplot yfactor configuration support breaks most common configurations ### Added ### - [TSUN-135] - add support for SASL ANONYMOUS and PLAIN authentication for XMPP - [TSUN-136] - add new plugin distributed testing of filesystem (nfs for ex), using a generic mode for executing erlang functions on clients nodes - [TSUN-137] - add a way to mix requests types inside a single session - [TSUN-143] - global time limit for the load test - [TSUN-145] - tsung should support json parsing for dynamic variable ## [1.3.1] - 2009-09-09 - Major bugfixes and enhancements ## ### Fixed ### - [TSUN-92] - the computation of the minimum for sample_counter is wrong - [TSUN-93] - maxnumber not respected if several clients are used - [TSUN-102] - dyn_variable configuration fails if variable name is not a valid erlang atom - [TSUN-103] - Network error handling in munin plugin - [TSUN-104] - tsung-plotter can't handle the os_mon statistics - [TSUN-108] - Cannot handle complicated dyn_var name - [TSUN-109] - Tsung status displays always phase one even if you have more than one phase - [TSUN-110] - Cookie header not present if the URL is dynamically generated by a previous redirection (302) - [TSUN-117] - Bug in HTTP: empty header can be generated in some case - [TSUN-118] - HTTPS proxy recorder: ts_utils:to_https incorrectly handles Content-Length for POST requests - [TSUN-119] - tsung can crash when reading empty values from a csv file - [TSUN-122] - same http cookie key with different domains don't work ### Changed ### - [TSUN-47] - ts_mon can be a bottleneck during very high load testing - [TSUN-77] - Structural requests or goto-like action for match in HTTP - [TSUN-81] - Dynamic variables API - [TSUN-83] - file_server using fixed tuple instead of list - [TSUN-85] - external entity should be copied into the log directory of a run. - [TSUN-87] - add dynamic code evaluation in set_dynvars - [TSUN-88] - add mkactivity method support in webdav - [TSUN-91] - reduce memory consumption by hibernating client process while in think state - [TSUN-97] - disable smp erlang for client beam for performance reason - [TSUN-98] - try several times to connect to the server before aborting a session - [TSUN-99] - make substitution work in - [TSUN-100] - improve scalability of ts_launcher - [TSUN-105] - Add load average statistic to server monitoring - [TSUN-111] - add option to manually add a cookie in http requests - [TSUN-113] - split tsung command into two separate tsung and tsung-recorder commands - [TSUN-116] - add ability to run several tsung running in parallel on the same hosts - [TSUN-120] - Https recorder: Remove "Secure" from "Set-Cookie" header. ### Added ### - [TSUN-25] - add a way to start sessions in a specific order at specified times - [TSUN-89] - include tsung-plotter into the tsung distribution - [TSUN-90] - add support for monitoring server cpu/mem using munin-node - [TSUN-94] - add log action for match - [TSUN-95] - add a default dyn_variable with a unique tsung_userid - [TSUN-107] - add MUC support to the jabber doc/plugin - [TSUN-114] - add option to apply function to data before looking for a match - [TSUN-115] - add pubsub support to the jabber plugin ## [1.3.0] - 2008-09-03 - Major bugfixes and enhancements ## ### Fixed ### - [TSUN-30] - SNMP monitoring gives an error - [TSUN-57] - using -l with a relative path make distributed load fails with timeout error - [TSUN-60] - https recorder broken if an HTML document includes absolute urls - [TSUN-67] - Typo breaks recording of if-modified-since headers - [TSUN-68] - some sites doesn't work with ":443" added in the "Host" header with https - [TSUN-71] - Tsung does not work with R12B (httpd_util funs removed) - [TSUN-73] - Wrong parsing HTTP multipart/form-data in http request - POST form doesn't work - [TSUN-75] - can not define more -pa arguments - [TSUN-84] - dyn variables that don't match should be set to an empty string ### Changed ### - [TSUN-40] - problem to rewrite url for https with gzip-encoded html. - [TSUN-48] - tcp/udp buffer size should be customizable in the XML config file. - [TSUN-59] - if a User-Agent header is set in
, it should override the global one. - [TSUN-62] - add abilty to loop back to a previous request in a session - [TSUN-63] - check for ssl and crypto application at compile time - [TSUN-65] - enhance dynamic variables. - [TSUN-66] - add global mean and counter computation and reporting for samples - [TSUN-69] - add option to read content of a POST request from an external file - [TSUN-79] - setting 'Host' header with http_header doesn't work as expected ### Added ### - [TSUN-56] - ldap plugin - [TSUN-58] - add a new statistics backend to dump all stats in a file - [TSUN-61] - add a Webdav plugin - [TSUN-64] - add md5 authentication in the pgsql plugin - [TSUN-72] - Add support for defining dyn_variables using XPath - [TSUN-78] - mysql plugin - [TSUN-80] - add random thinktime with in a given range ( [min,max]) - [TSUN-76] - add explanation for errors name in the documentation ### [1.2.2] - 2008-02-23 - Minor bugfixes and enhancements ### ### Fixed ### - [TSUN-30] - SNMP monitoring gives an error - [TSUN-31] - dyn_variable usage - [TSUN-35] - udp is not working - [TSUN-36] - default regexp for dyn_variable doesn't work in all case - [TSUN-38] - server monitoring crash if an ethernet interface's name is more than 6 chars long - [TSUN-39] - https recording doesn't work with most browsers - [TSUN-43] - session should not terminate if rosterjid is not defined - [TSUN-49] - doesn't work with jabber plugin - [TSUN-51] - tsung does not work with R12B (httpd_util funs removed) - [TSUN-53] - postgresql errors not reported in all cases - [TSUN-55] - no error counter when userid_max is reached ### Changed ### - [TSUN-14] - no_ack messages and asynchronous msg sent by the server are not available in the reports - [TSUN-27] - handle bidirectional protocols - [TSUN-28] - Refactoring needed to ease the change of the userid / password generation code - [TSUN-29] - Multiple file_server support - [TSUN-32] - make snmp server options tunable - [TSUN-34] - add costum http headers - [TSUN-44] - tsung should ignore whitespace keepalive from xmpp server - [TSUN-45] - add kernel-poll support for better performance - [TSUN-46] - add number of open connections in statistics - [TSUN-47] - ts_mon can be a bottleneck during very high load testing - [TSUN-50] - use the whole range of Id (from 0 to userid_max) before reusing already used Ids ### Added ### - [TSUN-26] - Ability to loop on a given sequence of phase - [TSUN-52] - Adding comment during script capture - [TSUN-41] - add support for parent proxy for http only (not https) ## [1.2.1] - 2006-10-07 - Minor bugfixes and enhancements ## ### Fixed ### - [TSUN-5] get traffic from all interfaces instead of only *eth0* in erlang os monitoring (Linux) - [TSUN-18 the pgsql recorder fails if the client doesn't try first an SSL connection - [TSUN-19] a % character in some requests (eg. type=sql for pgsql) make the config_server crash. - [TSUN-20] pgsql client fails while parsing data from server - [TSUN-21] substitution in URL is not working properly when a new server or port is set - [TSUN-23] set default http version (1.1) - [TSUN-24] destination=previous doesn't work (jabber) ### Changed ### - [TSUN-15] listen port is now customizable with the command line - [TSUN-17] add option to setup postgresql server IP and port at runtime for the recorder - [TSUN-22] add support for PUT, DELETE and HEAD methods for http ## [1.2.0] - 2006-05-29 - Major feature enhancements ## ### Fixed ### - fix beams communication problem introduced in new erlang releases. - fix several small problems with 'use_controller_vm' option - fix regression in recorder for WWW-Authentication (anders.nygren@gmail.com) - fix presence:roster request - fix online: must use presence:initial to switch to online status - fix single user agent case. - minor fixes for HTTP parsing ### Changed ### - change name: idx-tsunami is now called tsung - import snmp_mgr src from R9C2 to enable SNMP with R10B - rebuild boot scripts if erlang version is different from compile time - many DTD improvements - improved match: add loop|abort|restart on (no)match behavior, multiple match tags is now possible (suggested by msmith@truelink.com) - ip is no more mandatory (default is 0.0.0.0) - close client socket when connection:closed is ask by the server (this should enable https recording with IE) - roster enhancements (jasonwtucker@gmail.com) ### Added ### - add new plugin: pgsql for postgresql load testing - new: it's now possible to set multiple servers (selected at runtime by round robin) - add size_rcv stats - freemem and packet stats for Solaris (jasonwtucker@gmail.com) - clients and monitoring can use hosts list defined in environment variables, for use with batch schedulers (openpbs/torque, LSF and OAR) - performance improvements in stats engine for very high load (use session_cache) - add plugin architecture in recorder; add pgsql plugin - add *presence:directed* , *presence:broadcast* & *presence:final* requests for jabber (jasonwtucker@gmail.com) - sip-digest authentication (jasonwtucker@gmail.com) - add pubsub support (mickael.remond@process-one.net) ## [1.1.0] - 2005-09-05 - Major feature enhancements ## ### Added ### - new feature: HTTP proxy load testing in now possible (set *http_use_server_as_proxy* to true) - add dynamic substitution support for jabber - add 'raw' type of msg for Jabber (use the new 'data' attribute) - UserAgent is now customizable for HTTP testing ### Changed ### - add the dynamic variable list to dynamic substitutions - Add an option to run all components (controller and launcher) within a single erlang beam (*use_controller_vm*). Should ease idx-tsunami use for light load tests - internal: Host header is now set during configuration phase ### Fixed ### - fix bash script for solaris (jasonwtucker@gmail.com) - fix: several 'idx-tsunami status' can be run simultaneously (reported by Adam Spotton) - fix last phase duration - fix recorder: must log absolute url if only the scheme has changed ## [1.0.3] - 2005-07-08 - Minor bugfixes ## ### Fixed ### - fix broken https recording Thx to johann.messner@jku.at for bug reporting : - fix: forgot to add *"?"* when an URL is absolute and had a query part - fix regression in the recorder (introduced in 1.0.2): must use CAPS for method, wrong content-length in recorder causing POST requests to silently fail - fix Host: header when port is != 80 ### Added ### - add *ts_file_server* module ### Changed ### - allow multiple 'dyn_variable' in DTD ## [1.0.2] - 2005-06-06 - Minor bugfixes ## ### Fixed ### - fix: the recorder is working now with R10B: replace call to *httpd_parse:request_header* in recorder by an internal func (the func was removed in R10B) - update configure scripts (should build on RHEL3/x86_64) ### Changed ### - remote beam startup is now tunable (-r ssh/rsh) - internal changes in ts_os_mon (suggested by R. Lenglet) ## [1.0.1] - 2004-11-18 - Major bugfixes ## ### Fixed ### - fix: broken free mem on non linux arch (Matthew Schulkind) - small fixes to the DTD Thx to Jonathan Bresler for testing and bug reporting : - fix: broken 'global', 'local' and 'no_ack' requests and size computation - fix: broken ids in jabber messages - fix: broken online/offline in user_server - default thinktime can now be overriden ### Added ### - add script to convert apache log file (combined) to idx-tsunami XML ### Changed ### - improved configure: add *--with-erlang* option and xmerl PATH detection idx-tsunami now compiles both with R9C and R10B - many improvements/fixes in analyse_msg.pl ## [1.0] - 2004-08-13 - Minor bugfixes ## ### Fixed ### - fix: broken path when building debian package - fix add_dynparams for jabber ### Added ### - add rpm target in makefile - implement status - add 'match' in graph and doc ## [1.0.beta7] - 2004-07-20 - Minor bugfixes ## ### Fixed ### - HTTP: really (?) fix parsing of no content-length with connection:close - better handling of configure (--prefix is working) - fix: ssl_ciphers option is working again ### Changed ### - add different types of output backend (currently, only 'text' works; 'rrdtool' is started but unfinished) ## [1.0.beta6] - 2004-05-05 - Minor feature enhancements ## ### Added ### - add a DTD for the configuration file - add dynamic request substitution (mickael.remond@erlang-fr) - add dynamic variable parsing from response (can be used later in the session for request substitution) - add response pattern to match (log if not match) ### Fixed ### - HTTP: fix partial header parsing (mickael.remond@erlang-fr.org) - HTTP: fix chunk parsing when the chunk-size is split across two packets - HTTP: fix parsing of no content-length with connection:close case - fix: do not connect in init anymore; this fix too long phases when connection time is high. ### Changed ### - check for bad input (config file, name) - merge client and client_rcv processes into a single process - connect stat is now for both new connections and reconnections - check phase duration in launcher - various code cleanup ## [1.0.beta5] - 2004-03-25 - Major Feature enhancements ## ### Added ### - add SNMP monitoring (not yet customizable) - SOAP Support: IDX-Tsunami can now record and replay SOAP HTTP scenario. The SOAPAction HTTP header is now recorded ### Fixed ### - fix remote start: log filename is now encoded to avoid bad parsing of log_file by 'erl' - Added ~/.idx-tsunami creation in idx-tsunami script if the directory does not already exist - HTTP: fix Cookie support: Cookie are not necessarily separated by "; " - HTTP: fix long POST request in the recorder: dorecord message was missing enclosing curly brackets, and the body length counter were mistakenly taking the header size in its total ### Changed ### - Extension of XML attribute entity normalisation - HTTP: Content-type support in the recorder (needed to handle non-HTML form encoded posts) - add autoconf support to detect Erlang installation path - Preliminary Windows support: A workaround has been introduced in the code to handle behaviour difference between Erlang Un*x and Erlang Windows on how the command-line is handled. When an assumtion is made on the string type of a parameter, it should be check that this is actually a string and not an atom. ## [1.0.beta4] - 2004-03-16 - Minor bugfixes ## ### Fixed ### - fix lost cookie when transfer-encoding:chunked is used - fix config parsing (the last request of the last page of a sesssion was not marked as endpage) - don't crash anymore on error during start or stop ## [1.0.beta3] - 2004-02-24 - Minor feature enhancements ## ### Fixed ### - fix stupid bug in start script for recorder - HTTP: fix '&' writes in the XML recorder for 'content' attribute ### Changed ### - HTTP: enhanced Cookies parsing ('domain' and 'path' implemented). - ssl_ciphers can be customized - change log directory structure: all log files in one directory per test - change stats names: page_resptime -> page, response_time -> request ### Added ### - add HTML reports (requires the perl Template toolkit) ## [1.0.beta2] - 2004-02-11 - Minor feature enhancements ## ### Changed ### - reorganise the sources - add tools to build a debian package - fix documentations - add minimalistic man page - syntax change: GETIMS +date replace by GET +'if_modified_since' ## [1.0.beta1] - 2005-02-03 - Major Feature Enhancements ## ### Added ### - rewrite the configuration engine. Now use an XML file. - add recording application: use as a HTTP proxy to record session into XML format - add support to OS monitoring (cpu, memory, network). Currently, use an erlang agent on the remote nodes; SNMP is on the TODO list. (mickael.remond@erlang-fr.org) - can now use several IPs per client host - several arrival phases can be set with different arrival rates and duration - can set test duration instead of number of users - add user defined statistics using a 'transaction' tag ### Fixed ### - HTTP: fix cookies and POST handling (mickael.remond@erlang-fr.org) - HTTP: rewrite the parser (faster and cleaner) - fix bad timeout computation when close occur for persistent client - bugfixes and other enhancements. - fix memory leak with ssl (half-closed connections) ## [0.2.1] - 2003-12-09 - Minor bugfixes and small enhancements ## ### Changed ### - optimize session memory consumption: use an ets table to store session setup - HTTP: preliminary chunked-encoding support in HTTP/1.1 - HTTP: Absolute URL are handled (server and port can be overridden ) - no more .hosts.erlang required - add stats on simultaneous users ### Fixed ### - HTTP: fix crash when content-length is not set in headers - HTTP: fix POST method ## [0.2.0] - 2003-08-29 - Major Feature Enhancements ## ### Added ### - add 'realtime' stats - add new 'parse' type of protocol - add reconnection support (persistent client) - add basic HTTP and HTTPS support - split the application in two parts: a single controller (tsunami_controller), and the clients (tsunami) - switch to R9C ## [0.1.1] - 2002-08-13 - Bugfix realease ## ### Fixed ### - fix config file - fix few typos in docs - fix init script - few optimizations in user_server.erl - switch to R8B ## [0.1.0] - 2001-05-30 - Initial release ## [Unreleased]: https://github.com/processone/tsung/compare/v1.6.0...HEAD [1.6.0]: https://github.com/processone/tsung/compare/v1.5.1...v1.6.0 [1.5.1]: https://github.com/processone/tsung/compare/v1.5.0...v1.5.1 [1.5.0]: https://github.com/processone/tsung/compare/v1.4.2...v1.5.0 [1.4.2]: https://github.com/processone/tsung/compare/v1.4.1...v1.4.2 [1.4.1]: https://github.com/processone/tsung/compare/v1.4.0...v1.4.1 [1.4.0]: https://github.com/processone/tsung/compare/v1.3.3...v1.4.0 [1.3.3]: https://github.com/processone/tsung/compare/v1.3.2...v1.3.3 [1.3.2]: https://github.com/processone/tsung/compare/v1.3.1...v1.3.2 [1.3.1]: https://github.com/processone/tsung/compare/v1.3.0...v1.3.1 [1.3.0]: https://github.com/processone/tsung/compare/v1.2.2...v1.3.0 [1.2.2]: https://github.com/processone/tsung/compare/v1.2.1...v1.2.2 [1.2.1]: https://github.com/processone/tsung/compare/v1.2.0...v1.2.1 [1.2.0]: https://github.com/processone/tsung/compare/v1.1.0...v1.2.0 [1.1.0]: https://github.com/processone/tsung/compare/v1.0.2...v1.1.0 [1.0.2]: https://github.com/processone/tsung/compare/v1.0.1...v1.0.2 [1.0.1]: https://github.com/processone/tsung/compare/v0.2.1...v1.0.1 [0.2.1]: https://github.com/processone/tsung/compare/v0.2.0...v0.2.1 [0.2.0]: https://github.com/processone/tsung/compare/v0.1.1...v0.2.0 [0.1.1]: https://github.com/processone/tsung/compare/v0.1.0...v0.1.1 [PR #148]: https://github.com/processone/tsung/pull/148 [PR #183]: https://github.com/processone/tsung/pull/183 [PR #202]: https://github.com/processone/tsung/pull/202 [PR #228]: https://github.com/processone/tsung/pull/228 [PR #124]: https://github.com/processone/tsung/pull/124 [PR #125]: https://github.com/processone/tsung/pull/125 [PR #198]: https://github.com/processone/tsung/pull/198 [PR #151]: https://github.com/processone/tsung/pull/151 [PR #153]: https://github.com/processone/tsung/pull/153 [PR #233]: https://github.com/processone/tsung/pull/233 [PR #235]: https://github.com/processone/tsung/pull/235 [PR #240]: https://github.com/processone/tsung/pull/240 [PR #91]: https://github.com/processone/tsung/pull/91 [PR #104]: https://github.com/processone/tsung/pull/104 [PR #107]: https://github.com/processone/tsung/pull/107 [PR #109]: https://github.com/processone/tsung/pull/109 [PR #111]: https://github.com/processone/tsung/pull/111 [PR #79]: https://github.com/processone/tsung/pull/79 [PR #81]: https://github.com/processone/tsung/pull/81 [PR #93]: https://github.com/processone/tsung/pull/93 [PR #106]: https://github.com/processone/tsung/pull/106 [PR #71]: https://github.com/processone/tsung/pull/71 [PR #41]: https://github.com/processone/tsung/pull/41 [PR #44]: https://github.com/processone/tsung/pull/44 [PR #49]: https://github.com/processone/tsung/pull/49 [PR #51]: https://github.com/processone/tsung/pull/51 [PR #65]: https://github.com/processone/tsung/pull/65 [PR #70]: https://github.com/processone/tsung/pull/70 [PR #74]: https://github.com/processone/tsung/pull/74 [PR #42]: https://github.com/processone/tsung/pull/42 [PR #75]: https://github.com/processone/tsung/pull/75 [#117]: https://github.com/processone/tsung/issues/117 [#121]: https://github.com/processone/tsung/issues/121 [#126]: https://github.com/processone/tsung/issues/126 [#136]: https://github.com/processone/tsung/issues/136 [#161]: https://github.com/processone/tsung/issues/161 [#162]: https://github.com/processone/tsung/issues/162 [#204]: https://github.com/processone/tsung/issues/204 [#218]: https://github.com/processone/tsung/issues/218 [#136]: https://github.com/processone/tsung/issues/136 [#145]: https://github.com/processone/tsung/issues/145 [#150]: https://github.com/processone/tsung/issues/150 [#159]: https://github.com/processone/tsung/issues/159 [#132]: https://github.com/processone/tsung/issues/132 [#182]: https://github.com/processone/tsung/issues/182 [#189]: https://github.com/processone/tsung/issues/189 [#201]: https://github.com/processone/tsung/issues/201 [#225]: https://github.com/processone/tsung/issues/225 [#242]: https://github.com/processone/tsung/issues/242